Zanussi Clothes Dryer TD 4113 W User Manual

TUMBLE DRYER  
TD 4113 W  
T
D
4
2
1
2
W
Timer  
Mains on  
Low  
emp.  
Cotton  
Synthetic  
T
Cool  
IRON DRY  
Spun at rpm 800/1000 1200/1400  
STORE DRY  
STORE DRY  
8
0
0
/
1
0
0
0
1
2
0
0
/
1
4
0
0
Spun at rpm  
600  
kg  
kg  
6
3
90’-115’ 80’- 100’  
45’- 70’ 35’- 55’  
1
0
5
-
1
3
5
9
5
-
1
2
0
kg 2.5  
30'  
15'  
-
-
40'  
25'  
6
0
-
8
5
5
0
-
70’  
kg  
1
E
S
S
E
N
T
I
A
L
AUTOREVERSE  
6
kg  
GB  
INSTRUCTION BOOKLET  
125981014  
 
Contents  
For the Installer  
For the User  
Installation Instructions  
13  
Important Safety Information  
Installation  
2
2
2
2
Technical Specifications  
13  
14  
Child Safety  
Positioning  
Use  
Fitting the vent hose  
14-15  
15  
Your New Tumble Dryer  
Description of the Appliance  
The Control Panel  
4
5
6
6
6
6
7
Stacking kit (optional accessory)  
Door reversal  
15  
Electrical connection  
16  
Buttons  
Mains-on light  
Time selector dial  
Programme Chart  
Operating Sequence  
Load the laundry  
8
8
8
8
8
Select the option  
Select the drying time  
When drying is completed  
Hints & Tips on Drying  
9
Maintenance and Cleaning  
External cleaning  
10  
10  
10  
10  
Cleaning the door  
Cleaning fluff filter  
Something Not Working  
Service and Spare Parts  
Customer Care  
11  
11  
11  
12  
Guarantee Conditions  
Guide to use the Instruction Book  
The following symbols will be found in the text to guide you throughout the instructions:  
Safety instructions  
Hints and tips  
Environmental information  
3
 
Your New Tumble Dryer  
This tumble dryer will give your wash that soft, relaxed feel whatever  
the weather.  
Extremely high quality standards both during development and  
manufacturing guarantee a long service life for your appliance.  
Maximum economy in the operation of your dryer is achieved through  
very frugal electricity consumption and short drying times.  
Energy saving tips  
To save energy we recommend that you follow these  
hints:  
In the interest  
of the environment  
Materials marked with the symbol  
recyclable.  
are  
Try to load the maximum capacity of the machine  
as small loads are uneconomical.  
Check with your local Council or Environmental  
Health Office to see if there are facilities in your  
area for re-cycling this appliance.  
Always load well spun laundry. The higher the  
spin speed, the lower the electricity consumption  
and the shorter the drying times.  
When the appliance is to be scrapped, cut off the  
power supply cable and make the door closing  
device unusable to prevent young children from  
being trapped inside.  
Do not over-dry laundry, this avoids creasing and  
saves energy.  
Clean the filter regularly to avoid excessive  
drying times and high electricity consumption.  
Help to keep your country tidy - use authorised  
disposal sites for your old appliance.  
Ventilate the room well. The room temperature  
should not exceed +35°C during drying.  
How do we help to protect the  
environment? We use recycled paper!  
Old appliance  
The symbol  
on the product or on its packaging  
indicates that this product may not be treated as  
household waste. Instead it shall be handed over to the  
applicable collection point for the recycling of electrical  
and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential  
negative consequences for the environment and human  
health, which could otherwise be caused by in appropriate  
waste handling of this product. For more detailed  
information about recycling of this product, please contact  
your local city office, your household waste disposal  
service or the shop where you purchased the product  
4
 
Description of the Appliance  
01 Work top  
1
34  
5
6
02 Programme chart  
03 Low Temperature Button  
04 Cool Button  
T
D
4
2
1
2
W
Timer  
Mains on  
Low  
Temp.  
Cool  
Cotton  
Synthetic  
IRON DRY  
Spun at rpm 800/1000 1200/1400  
STORE DRY  
STORE DRY  
800/1000 1200/1400  
Spun at rpm  
600  
kg  
kg  
6
3
90’-115’ 80’- 100’  
45’- 70’ 35’- 55’  
105’-135’ 95’-120’  
kg 2.5  
30'  
15'  
-
-
40'  
25'  
6
0
-
8
5
5
0
-
70’  
kg  
1
05 Mains-On Light  
06 Drying Time Selector Dial  
07 Rating Plate  
E
S
S
E
N
T
I
A
L
AUTOREVERSE  
6
kg  
2
7
08 Fluff filter  
09 Door Handle  
10 Adjustable feet  
9
8
10  
11 Side vent outlet  
12 Ring nut  
13 Rear vent outlet  
11  
13  
12  
5
 
The Control Panel  
TD 4113  
W
Timer  
Mains on  
Cotton  
Synthetic  
Low  
Temp.  
Cool  
IRON DRY  
Spun at rpm 800/1000 1200/1400  
STORE DRY  
STORE DRY  
800/1000 1200/1400  
105’-135’ 95’-120’  
60’- 85’ 50’ - 70’  
Spun at rpm  
kg 2.5  
kg 1  
800  
kg 6  
kg 3  
90’-115’ 80’- 100’  
45’- 70’ 35’- 55’  
30' - 40'  
15' - 25'  
ESSENTIAL  
AUTOREVERSE 6 kg  
2 3  
4
5
1
1 Programme Chart  
This will help you to select the correct time for  
drying.  
4 Mains-On Light  
This lights up when the machine starts operating and  
goes out at the end of the programme.  
2 Low Temperature Button  
5 Drying Time Selector Dial  
Press this button to reduce the temperature when  
drying particularly delicate cotton or linen items.  
In this case you should select a longer drying time.  
On the programmes for synthetics the temperature is  
automatically reduced.  
The selector dial incorporates two drying cycles, one  
of up to 120 minutes at a high temperature for cotton  
and linen, and one of up to 80 minutes at a low  
temperature for synthetic fabrics.  
To set the machine to the selected time, turn the dial  
clockwise until the time you want coincides exactly  
with the pointer.  
Therefore it is not necessary to depress this button.  
NEVER attempt to turn the dial in an anticlockwise  
direction.  
3 Cool Button  
By depressing this button the heat is cut off. This is  
particularly useful to freshen the laundry (e.g. to  
remove a persistent odour of moth-balls). Select 20-  
30 mins max.  
When selecting the drying time, you should  
remember that it includes a 8 minute cooling phase  
(position  
on the dial).  
This phase should not be shortened, stopped or  
avoided, as this could cause skin burns or damages to  
the laundry.  
6
 
Programme Chart  
Cotton and linen  
Selector dial: up to 120 minutes  
Drying time in minutes for  
laundry spun at  
Amount  
of laundry  
in kg  
Type of laundry:  
Degree of drying  
800/1000 rpm 1200/1400 rpm  
660  
3
105-135  
60-85  
95-120  
50-70  
Cotton  
Towelling  
Shirts  
Store dry  
(wardrobe dry)  
Sheets  
Hand towels  
Tablecloths  
Table napkins  
6
90-115  
45-70  
80-100  
35-55  
Iron dry  
(not completely dry;  
suitable for ironing)  
3
ATTENTION! If you are drying delicate cotton, select the ‘low temperature’ option  
Synthetics  
Selector dial: up to 80 minutes  
Drying time in minutes for laundry  
spun at a minimum speed of 800 rpm  
Amount of laundry  
in kg  
Degree of drying  
Type of laundry:  
2.5  
30-40  
Synthetics or mixed fabrics  
which do not require  
ironing.  
Store dry  
1
15-25  
25-35  
Synthetics or mixed fabrics  
which have to be ironed.  
(Please see labels on items)  
2.5  
Iron dry  
1
15-20  
ATTENTION! Please follow the instructions on labels when drying mixed fabrics.  
Drying times are given as a guide only. Experience will soon enable you to estimate the drying time needed for  
your usual laundry loads.  
Do not start by selecting a long drying time. It is better to determine the required degree of dryness by gradually  
increasing the drying time.  
For a mixed load (cotton and synthetics, for example) select the time for the most delicate fibres and increase it  
by 10 mins.  
7
 
Operating Sequence  
Before using your tumble dryer for the first time, we  
recommend you place a few damp cloths inside the  
appliance and dry for approximately 20 minutes.  
There may be dust inside a brand new tumble dryer.  
1. Load the laundry  
Open the door by pulling the door handle forwards.  
Load the items one at a time, shaking them out  
loosely and close the door.  
Please check the laundry does not get caught between  
the door and filter.  
3. Select the drying time  
Turn the selector dial clockwise to the desired time  
(in the high or low temperature range, according to  
the fabrics). The mains-on light illuminates and the  
programme starts.  
100  
120  
80  
M0046S  
P0305  
4. When drying is completed  
The machine stops automatically and the mains-on  
light goes out.  
2. Select the required option  
Depress Low Temp. or Cool Button depending on the  
fabrics you have to dry.  
Release button  
or  
, if depressed.  
Open the door and take out the laundry.  
Clean the filter after every drying programme.  
A clean filter ensures correct functioning of the  
appliance.  
Low  
Temp.  
Cool  
8
 
Hints & Tips on Drying  
Before placing articles of laundry in your tumble  
dryer, check the care labels to ensure they are  
recommended for tumble drying.  
Always load well spun laundry. The higher the  
spin speed the lower the electricity consumption  
and the shorter the drying time.  
DO NOT load dripping wet laundry into the  
dryer. Roll the article in a towel or spin to remove  
excess water.  
Care Labels you may find on your laundry  
normal drying (high temperature)  
delicate drying (low temperature)  
do not tumble dry  
Close poppers and zips and fasten any buttons.  
Sort the laundry. Separate synthetics from  
cotton/linens, and dry separately.  
Remove the laundry immediately after the  
programme has finished.  
may be tumble dried  
Use a fabric conditioning sheet to reduce static.  
We recommend the sheet is pinned to an article of  
laundry (using a safety pin).  
Do not overload the appliance.  
Here is a list of the approximate weight of some  
common laundry items.  
Mix the load i.e. large and small articles.  
When drying large items such as sheets, we  
recommend you periodically stop the dryer to  
redistribute the load.  
Sheet  
700 to 1000 g  
100 to 200 g  
400 to 500 g  
50 to 100 g  
Pillowcase  
Tablecloth  
Table Napkin  
Kitchen Towel  
Linen Hand Towel  
Hand Towel  
Bath Towel  
Bathrobe  
DO NOT use the tumble dryer to dry the  
following:  
70 to 120 g  
Articles contaminated with inflammable  
substances e.g. petrol, cleaning solvents, cooking  
oil, fats or hair lacquer.  
100 to 150 g  
150 to 250 g  
700 to 1000 g  
1000 to 1500 g  
200 to 300 g  
150 to 200 g  
Woollen and synthetic/wool mixtures unless the  
item is labelled as suitable for tumble drying.  
Shirt  
Apron  
Very delicate articles such as silk.  
Very large and bulky items such as duvets or  
sleeping bags.  
9
 
Maintenance and Cleaning  
You must disconnect the appliance from the  
electricity supply, before you can carry out any  
cleaning or maintenance work.  
Cleaning the filter  
Your dryer will only function well if the filter is  
clean.  
The filter collects all the fluff which accumulates  
during drying and it must therefore be cleaned at the  
end of each programme, before removing the  
laundry, with a damp cloth.  
External cleaning  
Use only soap and water and then dry thoroughly.  
From time to time, apply a little wax furniture cream  
with a soft cloth.  
Important: do not use methylated spirit, diluents or  
similar products.  
Cleaning the door  
Clean periodically the interior part of the door to  
remove any fluff.  
Accurate cleaning ensures correct drying.  
P0767  
The filter cannot be removed.  
Do not be alarmed by the amount of fluff. It is not  
due to excessive wear caused by the dryer. All fabric  
looses fluff when drying but it goes un-noticed in the  
air. In a tumble dryer it simply collects in the filter.  
P0328  
10  
 
Something Not Working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without  
calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.  
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect  
use or installation, a charge will be made even if the appliance is under guarantee.  
Symptom  
Possible causes  
The door has not been closed.  
The plug is not properly inserted in the power  
socket.  
The tumble dryer does not start  
There is no current at the socket  
The main fuse or the fuse in the plug has blown.  
A drying time has not been selected.  
Drying takes too long or laundry is not dry  
enough.  
The laundry has not been spun properly.  
The filter is clogged up.  
The room temperature is too high.  
The selected time or sector was not suitable for  
the laundry  
There is too much laundry inside the appliance.  
The dryer is not correctly installed.  
The Low Temperature or Cool Tumble Button  
has been depressed.  
Service & Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact your  
local Service Force Centre by telephoning:  
0870 5 929929  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
Mod. ...  
Prod. No. ........  
Ser. No. ............  
P0307  
For the address of your local Service Force Centre  
and further information about Service Force, please  
Before calling out an engineer, please ensure you have read  
the details under the heading “Something Not Working”.  
Customer Care Department  
For general enquiries concerning your Zanussi  
Electrolux appliance or for further information on  
Zanussi Electrolux products, please contact our  
Customer Care Department by letter or telephone at  
the address below or visit our website at  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of fault  
4. The model and serial number of the appliance  
(found on the rating plate - see picture)  
5. The purchase date.  
Customer Care Department  
Major Appliances  
Addington Way  
Luton  
Bedfordshire  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls.  
LU4 9QQ  
Tel 08705 727727*  
To buy accessories, consumables and spare parts at  
our online shop please visit: http://www.zanussi-  
electrolux.co.uk  
* calls to this number may be recorded for training  
purposes.  
11  
 
Zanussi Guarantee Conditions  
Standard guarantee conditions  
Exclusions  
We, Zanussi Electrolux, undertake that if, within 12  
months of the date of the purchase, this ZANUSSI  
ELECTROLUX appliance or any part thereof is  
proved to be defective by reason only of faulty  
workmanship or materials, we will, at our option  
repair or replace the same FREE OF ANY CHARGE  
for labour, materials or carriage on condition that:  
This guarantee does not cover:  
Damage or calls resulting from transportation,  
improper use or neglect, the replacement of any  
light bulbs or removable parts of glass or plastic.  
Costs incurred for calls to put right an appliance  
which is improperly installed or calls to  
appliances outside the United Kingdom.  
The appliance has been correctly installed and  
Appliances found to be in use within a  
used only on the electricity supply stated on the  
rating plate.  
commercial environment, plus those which are  
subject to rental agreements.  
The appliance has been used for normal domestic  
Products of Zanussi Electrolux manufacture  
purposes only, and in accordance with the  
manufacturer’s instructions.  
which are NOT marketed by Zanussi Electrolux.  
The appliance has not been serviced, maintained,  
repaired, taken apart or tampered with, by any  
person not authorised by us.  
European guarantee  
If you should move to another country within Europe  
then your guarantee moves with you to your new  
home subject to the following qualifications:  
All service work under this guarantee must be  
undertaken by a Service Force Centre.  
Any appliance or defective part replaced shall  
become the Company’s property.  
The guarantee starts from the date you first  
purchased your product.  
This guarantee is in addition to your statutory and  
other legal rights.  
The guarantee is for the same period and to the  
same extent for labour and parts as exists in the  
new country of use for this brand or range of  
products.  
Home visits are made between 8.30am and 5.30pm  
Monday to Friday. Visits may be available outside  
these hours in which case a premium will be  
charged.  
The guarantee relates to you and cannot be  
transferred to another user.  
Your new home is within the European  
Community (EC) or European Free Trade Area.  
The product is installed and used in accordance  
with our instructions and is only used  
domestically, i.e. a normal household.  
The product is installed taking into account  
regulations in your new country.  
Before you move please contact your nearest  
Customer Care Centre, listed below, to give them  
details of your new home. They will then ensure that  
the local Service Organisation is aware of your move  
and able to look after you and your appliances.  
France  
Germany  
Italy  
Senlis  
+33 (0) 344 62 29 29  
+49 (0) 800 234 7378  
+39 0434 39 4700  
Nurnberg  
Pordenone  
Stockholm  
Luton  
Sweden  
UK  
+46 (0) 8 672 53 90  
+44 (0)  
8705 727727  
12  
 
Installation Instructions  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Care must be taken to ensure that the appliance  
does not stand on the electrical supply cable.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Technical Specifications  
DIMENSIONS  
Height  
Width  
Depth  
85 cm (33.5”)  
60 cm (23.6”)  
57 cm (22.4”)  
POWER SUPPLY VOLTAGE  
TOTAL POWER ABSORBED  
230-240 V/50 Hz  
2250 W (10A)  
MAXIMUM RECOMMENDED LOAD  
Cotton, linen  
Synthetics  
6. kg (11 lbs)  
2.5 kg (5.5 lbs)  
DRUM VOLUME  
CONSUMPTIONS  
108 l  
4.00 kWh (6 kg store dry)  
3.20 kWh (6 kg iron dry)  
This appliance complies with the following E.E.C. Directives:  
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;  
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.  
13  
 
Positioning  
It is recommended that, for your convenience, the  
machine is positioned close to your washing  
machine.  
Fitting the vent hose  
To simplify the installation, there is a choice of vent  
outlets: one at the back, the others in the left and  
right-hand side.  
Whilst drying, the tumble dryer will expel a certain  
amount of warm, very moist air, and this should be  
removed from the room as quickly as possible to  
prevent condensation. In an extremely well ventilated  
room or close to an open window, this may occur  
naturally.  
Connect the hose to whichever is the more  
convenient by pulling the ring nut (A) from the vent  
outlet at the back, screwing it on to the hose and  
pushing it firmly back into place.  
The unused vents should now be sealed with the  
special snap covers provided.  
However, in general, it is better to carry the dryer's  
exhaust outside via a 100 mm diameter flexible hose  
(supplied with the machine); ending either  
temporarily at an open window, or permanently at a  
fixed ventilation grille, fitted to an exterior wall or  
window.  
A
The tumble dryer must be installed in a clean place,  
where dirt does not build up.  
Make sure there are no obstructing items or material  
near the air-intake louvres provided at the back (e.g.  
paper, rags etc.).  
To keep vibration and noise to a minimum when the  
dryer is in use, it should be placed on a firm, level  
surface.  
Once in its permanent operating position, check that  
the dryer is absolutely level with the aid of a spirit  
level. If it is not, raise or lower the two adjustable  
feet at the front of the machine until it is.  
A
P1028  
P1027  
Advice: If the hose is long and the room temperature  
low, the moisture might condense to water inside the  
hose. This is an unavoidable natural phenomenon.  
To prevent this water from lying in the hose or  
flowing back into the tumble dryer, it is advisable to  
drill a small hole (dia. 3 mm) in the lowest point of  
the hose and to place a small container below it.(See  
picture, point B).  
B
P1056  
P0046  
Once connected to the dryer, run the vent hose to the  
desired outlet point, ensuring that the run’s overall  
length is less than 2.5 m, and that it contains no more  
than two bends. As to the outlet itself, if you have  
decided on a fixed wall/window grille, a good local  
builder’s merchant should be able to supply you with  
the necessary fittings and installation advice.  
The feet must never be removed.  
Do not restrict the floor clearance through deep-  
pile carpets, strips of wood or similar. This might  
cause heat build-up which would interfere with  
the operation of the appliance.  
Important  
When operating the tumble dryer, the room  
temperature must not exceed 35°C, as it may affect  
the performance of the appliance.  
14  
 
It is important not to connect the vent  
hose to, for example, a cooker hood,  
or a chimney or flue pipe designed to  
carry the exhaust from a fuel burning  
appliance.  
Door reversal  
To make it easier to load or unload the laundry the  
door can be reversed.  
This operation must be carried out by your local  
Service Force repair agent (tel 08705 929929).  
This will be a chargeable option.  
Operate as follows:  
- Remove the door by unscrewing the two screws (1)  
fastening the hinge to the cabinet (Fig. A).  
- Remove the safety catch (2) and the plug (3) by  
bending the two fastening tags (Fig. A).  
P0055  
Note that to avoid condensation problems, it is  
essential that the dryer be fitted with the flexible hose  
to carry its “exhaust” at least beyond the kitchen  
units; preferably outside the kitchen.  
2
In order to prevent the appliance from overheating, it  
is important that the steam exhaust is unobstructed.  
Therefore, in case of a permanent hose fitted to an  
exterior wall or ceiling, it must have an exhaust  
capacity of at least 150 m3/h.  
4
1
3
A
P0283  
- Refit the safety catch (2) and plug (3) on the door  
by reversing their positions (Fig. B).  
If the dryer is fitted next to kitchen units, make  
sure that the vent hose is not squashed. If the hose  
is partially squashed, drying efficiency will be  
reduced, resulting in longer drying times and  
higher energy consumption.  
If the hose is completely squashed, the safety cut-  
outs with which the machine is fitted may operate.  
2
4
1
3
B
P0748  
Stacking kit  
It should be possible to stack your new dryer on top  
of your washing machine.  
- Remove the plastic plate (4) by unscrewing the two  
fastening screws (Fig. A).  
- Refit the plastic plate (4) on the opposite side  
(Fig. B).  
Please contact your local Service Force Centre for  
further advice.  
- Refit the door by screwing in the two screws (1)  
which fasten the door to the cabinet (Fig. B).  
P0280  
15  
 
The wire coloured brown must be connected to the  
terminal marked «L» or coloured red.  
Upon completion there must be no cut, or stray  
strands of wire present and the cord clamp must be  
secure over the outer sheath.  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
WARNING: THIS APPLIANCE MUST BE  
EARTHED.  
WARNING:  
A cut off plug inserted into a 10 amp socket  
is a serious safety (shock) hazard.  
Ensure that the cut off plug is disposed of  
safely.  
The manufacturer declines any liability  
should this safety measure not be observed.  
Before switching on, make sure the electricity supply  
voltage is the same as that indicated on the  
appliance’s rating plate. (See picture).  
The power supply cable must be easily accessible  
after installing the machine.  
Permanent connection  
In the case of permanent connection it is necessary  
that you install a double pole switch between the  
appliance and the electricity supply (mains), with a  
minimum gap of 3mm between the switch contacts  
and of a type suitable for the required load in  
compliance with the current electrical regulations.  
Mod. ...  
Prod. No. ........  
Ser. No. ............  
P0307  
The appliance is supplied with a 10amp plug fitted.  
In the event of having to change the fuse in the plug  
supplied, a 10amp ASTA approved (BS 1363/A) fuse  
must be used.  
The switch must not break the yellow and green earth  
cable at any point.  
Should the plug need to be replaced for any reason,  
proceed as described below.  
The wires in the mains lead are coloured in  
accordance with the following code:  
Green and Yellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
E
L
N
BROWN  
BLUE  
CORD CLAMP  
P1041  
The wire coloured green and yellow must be  
connected to the terminal marked with the letter «E»  
or by the earth symbol  
yellow.  
or coloured green and  
The wire coloured blue must be connected to the  
terminal «N» or coloured black.  
16  
 
From the Electrolux Group. The world’s No. 1 choice.  
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor  
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,  
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in  
more than 150 countries around the world.  
© Electrolux plc 2005  
 

Whirlpool Dehumidifier AD25BSS User Manual
Whirlpool Dishwasher 431 User Manual
Whirlpool Freezer EH151FXRQ00 User Manual
Whirlpool Washer Dryer LSR4311DQO User Manual
Whynter Ice Maker UIM 155 User Manual
Wolf Ventilation Hood CT15G S User Manual
Yamaha DVD Player DVD S80 User Manual
Zanussi Clothes Dryer TD 4112 W User Manual
Zanussi Oven FM 55 User Manual
Zanussi Washer FJS 1197 W User Manual